MENU
#06531
Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+)
IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 (one port with PoE) |
| PoE PD Port |
Present at ETH, Fully compliant with IEEE 802.3af Power Device specification, Over load and short circuit protection, Isolation Voltage 1000 VDC min., Isolation Resistance 108MΩ min |
| WLAN interface | |
| Operating Mode | AP/Bridge/Bridge/AP-Client |
| Antenna Connector | 1 x External reverse SMA-type antenna connector |
| Radio Frequency Type |
DSSS, OFDM |
| Modulation IEEE802.11b |
CCK, DQPSK, DBPSK |
| Modulation IEEE802.11g/n |
OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band | 2.412~2.472 Ghz (13 channels) |
| Transmission Rate |
IEEE802.11b 1/2/5.5/11 Mbps, IEEE802.11g 6/9/12/18/24/36/48/54 Mbps, IEEE802.11n UP to 150 Mbps |
| Transmit Power |
802.11b 19dBm ± 1.5dBm@11Mbps, 802.11g 17dBm ± 1.5dBm@54Mbps, 802.11gn HT20 16.5dBm ± 1.5dBm @MCS7, 802.11n HT40 14.5dBm ± 1.5dBm @MCS7 |
| Receiver Sensitivity |
802.11b -90dBm ± 2dBm@1Mbps, 802.11g -72dBm ± 2dBm@54Mbps, 802.11n HT20 -68dBm ± 2dBm@MCS7 |
| Encryption Security |
WEP (64-bit ,128-bit key), WPA/WPA2 PSK - TKIP and AES encryption (802.11i), 802.1X/RADIUS Authentication supported |
| Wireless Security | SSID broadcast disable |
| Protocol Support |
ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D) |
| LED Indicators | |
| Power Indicator |
LED x 3, PWR 1, 2, (PoE), Green On- Power is on and functioning Normally. |
| 10/100Base-T(X) RJ45 Port Indicator |
2 x LEDs, Green for port Link/ Act |
| WLAN LEDs |
LED, Green (blinking) for WLAN |
| Power | |
| Redundant Input Power | Dual DC inputs. 12~48VDC on 4-pin terminal block |
| Power consumption (typical) | 4W |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 41(W)x81(D)x95(H) mm |
| Weight | 292g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -10÷60°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#06535
Wireless router 4G LTE, 2x 10/100 RJ-45 (LAN) + 1x 802.11b/g/n (WLAN) + 1x RS-232/422/485 (ORing IMG-4312-4G)
IMG-4312-4G is an innovative 1 port RS-232/422/485 and 4G LTE cellular Gateway with 2 port 10/100Base-T(X) port. IMG-4312-4G also provide IEEE802.11 b/g/n wifi interface which have 150Mbps link speed. It could be configured to connect to the internet by dialing up 2G/3.5G/LTE cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-4312-4G can also transfer data into 5 host PCs simultaneously for backup purposes. In addition, IMG-4312+-4G also provides P.D. feature on ETH1 port which is fully compliant with IEEE802.3af PoE P.D. specification Therefore, IMG-4312-4G is one of the best solutions for applications of wireless and serial communication.
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports RJ-45 Auto MDI/MDIX | 2 |
| SIM Card Slot | 1 (Only Mini SIM without adapter) |
| WLAN interface | |
| Antenna Connector | 1 x RP-SMA Female |
| Modulation IEEE802.11b |
CCK, DQPSK, DBPSK |
| Modulation IEEE802.11g/n |
OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band | 2.412~2.472 Ghz |
| Transmission Rate |
IEEE802.11b 1/2/5.5/11 Mbps, IEEE802.11g 6/9/12/18/24/36/48/54 Mbps, IEEE802.11n UP to 150 Mbps |
| Transmit Power |
802.11b 19dBm ± 1.5dBm@11Mbps, 802.11g 17dBm ± 1.5dBm@54Mbps, 802.11gn HT20 16.5dBm ± 1.5dBm @MCS7, 802.11n HT40 14.5dBm ± 1.5dBm @MCS7 |
| Receiver Sensitivity |
802.11b -90dBm ± 2dBm@1Mbps, 802.11g -72dBm ± 2dBm@54Mbps, 802.11n HT20 -68dBm ± 2dBm@MCS7 |
| Encryption Security |
WEP (64-bit ,128-bit key), WPA/WPA2 PSK - TKIP and AES encryption (802.11i), 802.1X/RADIUS Authentication supported |
| Cellular Interface | |
| Antenna Connector | 2 x RP-SMA Female |
| Cellular Standard | GSM/GPRS/EGPRS/EDGE/WCDMA/HSDPA/HSUPA/LTE |
| Band Option |
Europe(EU grade) LTE - 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHz, UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/900/1900/2100 MHz, GSM/GPRS/EDGE - 850/900/1800/1900 MHz |
| Serial Ports | |
| Connector | DB9 x1 |
| Operation Mode |
RS-232, RS-422, RS-485 4/2-wire, can be configured by DS-Tool |
| Serial Baud Rate | 110 bps to 460.8 Kbps |
| Data Bits | 7, 8 |
| Parity |
odd, even, none, mark, space |
| Stop Bits | 1, 1.5, 2 |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485 (4-wire) | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485 (2-wire) | Data+, Data-, GND |
| Flow Control |
XON/XOFF, RTS/CTS, DTR/DSR |
| Network Protocol |
ICMP, IP, TCP, UDP, DHCP, BOOTP, DNS, SNMP V1/V2c, HTTPS |
| LED Indicators | |
| Power Indicator |
3 x LEDs, Green On - Power is on |
| 10/100TX RJ45 port indicator |
2 x LEDs, Green for port Link/Act at 100Mbps. |
| Serial TX / RX LEDs |
Red - Serial port is receiving data, Green - Serial port is transmitting data |
| WIFI LEDs |
1 x LED, Green for WiFi Link/ Act |
| WAN LED |
1 x LED, Green for Cellular modem Link/ Act |
| Power | |
| Redundant Input Power | Dual DC inputs. 12~48 VDC on 6-pin terminal block |
| Power consumption (typical) | 3W |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 45(W)x80.6(D)x95(H) mm |
| Weight | 368g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -10÷60°C (14÷130°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
