This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Sunday, 24 November
Search for product:
 PoE SWITCHES UNMANAGED
#07993

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
Power consumption (typical) 5.6W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 94.9m x 144.3mm
Weight 530g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 449,00 EUR  Unit: pcs  VAT: 23%

#07991

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 5.6W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 395g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 371,00 EUR  Unit: pcs  VAT: 23%

#07670
NEW

Unmanaged industrial switch, 4x 100/1000 RJ-45 PoE, 1x 100/1000 RJ-45, 1x 1000 SFP (Wave Industrial WO-IS-M1GF5GT-4POE)

Physical Ports
100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4 w/PoE + 1
1000Base-FX SFP ports 1
Technology
Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X
LED Indicators power,
RJ45 ports (5)
Power Dual DC inputs. 48÷57VDC on 4-pin terminal block
Power consumption (typical) 6.5W
Physical Characteristic
Enclosure IP-40
Dimension (W x H x D) 33mm x 115mm x 85mm
Weight 350g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷85°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
WAVE INDUSTRIAL
Net Price: 78,60 EUR  Unit: pcs  VAT: 23%

#07972

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)

IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
Power consumption (typical) 6.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 94.9m x 144.3mm
Weight 650g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 382,00 EUR  Unit: pcs  VAT: 23%

#07971

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 6.3W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 410g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷185°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 340,00 EUR  Unit: pcs  VAT: 23%

#07645

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
Amber for 100Mbps indicator
100/1000Base-X port indicator Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (typical) 6.2W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
Weight 407 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 316,00 EUR  Unit: pcs  VAT: 23%

#08433

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
Amber for 100Mbps Indicator
100/1000Base-X SFP port indicator Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
Power consumption (typical) 6.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
Weight 580 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
* For special orders only
Net Price: 363,00 EUR  Unit: pcs  VAT: 23%

#07989

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

IPS-1080 is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 2x 12~57VDC on 6-pin terminal block
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 412g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
Net Price: 344,00 EUR  Unit: pcs  VAT: 23%

#07988

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

IPS-1080A is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50VDC on 6-pin terminal block
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 412g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
Net Price: 275,00 EUR  Unit: pcs  VAT: 23%

#06517

Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k MAC addresses
Processing Store-and-Forward
Switch Properties Switching latency less than 7us,
Switching bandwidth 20Gbps
Jumbo frame Up to 9.6K Bytes
Packet buffer 4Mbit
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Amber - Indicate power failed even warning
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator Green for port Link/Act
DIP Switch
DIP-Switch 1 Power-1 failed warning (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning (ON) enable,
(OFF) disable
DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
Power consumption (typical) 11W
PoE Power budget 180W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
Weight 889g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC EN55032,
EN55024(CE EMC),
FCC Part 15B,
EN61000-3-2,
EN61000-3-3
EMI CISPR 32,
EN55032,
FCC Part 15B class A
EMS IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF),
IEC 61000-4-11 (DIP)
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
Net Price: 527,00 EUR  Unit: pcs  VAT: 23%


Page 3 of 12