MENU
#07996
Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)
IPS-3082GC-24V is managed redundant ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-3082GC-24V supports wide range 24~36VDC power inputs and generates 48VDC P.S.E. power output per port. Each IPS-3082GC-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC-24V support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All function of IPS-3082GC-24V can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
| 1000 COMBO with SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 4 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 5.6 Gbps |
| Max. Number of Available VLANs | 4096 |
| IGMP multicast groups | 1024 |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
| Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
| DDM Function |
Voltage, Current, Temperature |
| LED Indicators | |
| Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
| Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
| O-Ring indicator | Green - Indicate system operated in O-Ring mode |
| Fault indicator | Amber - Indicate unexpected event occurred |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
| 1000X / Fiber port indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block |
| Power consumption (typical) | 11.52W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
| Weight | 1260g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#08849
Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)
IPS-3082GC-AT is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With complete support of Ethernet redundancy protocols, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS-3082GC switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC supports new a DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All functions of IPS-3082GC can be managed centralizedly by a powerful windows utility — Open-Vision. In addition, the wide operating temperature, range from -40 to 70°C, can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application with PoE function.
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
| 1000 COMBO with SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 4 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 5.6 Gbps |
| Max. Number of Available VLANs | 4096 |
| IGMP multicast groups | 1024 |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
| Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
| DDM Function |
Voltage, Current, Temperature |
| LED Indicators | |
| Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
| Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
| O-Ring indicator | Green - Indicate system operated in O-Ring mode |
| Fault indicator | Amber - Indicate unexpected event occurred |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
| 1000X / Fiber port indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 50÷57VDC on 6-pin terminal block |
| Power consumption (typical) | 7.68W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
| Weight | 1185g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#07671
Managed industrial switch, 8x 100/1000 RJ-45 PoE, 2x 1000 SFP (Wave Industrial WO-IS-M2GF8GT-8POE-M)
| Physical Ports | |
|---|---|
| 100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 w/PoE |
| 1000Base-FX SFP ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
| LED Indicators |
power, RJ45 ports, SFP slots, PoE (8) |
| Power | Dual DC inputs. 48÷57VDC on 4-pin terminal block |
| Power consumption (typical) | 12W |
| PoE standards |
802.3at, 802.3af |
| PoE budget | 200W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x H x D) | 48mm x 142mm x 116mm |
| Weight | 580g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷85°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#07656
Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)
IGPS-9084GP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.), IEEE 1588-2002 |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 28 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 256 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2Watts (power device not included) |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch) |
| Weight | 1205g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07997
Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-LA-24V)
IGPS-9084GP-LA-24V is a managed redundant ring PoE Ethernet switch with 4x10/100/1000Base-T(X) IEEE 802.3at P.S.E. ports and 2x100/1000Base-X SFP ports.
The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
IGPS-9042GP-24V also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
Each IGPS-9042GP-24V switch has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C.
IGPS-9042GP-24V can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
Therefore, the switch is one of the most reliable choice for highly-managed PoE and Fiber Ethernet application.
The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
IGPS-9042GP-24V also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
Each IGPS-9042GP-24V switch has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C.
IGPS-9042GP-24V can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
Therefore, the switch is one of the most reliable choice for highly-managed PoE and Fiber Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 12 Gbps |
| Max. Number of Available VLANs | 4095 |
| IGMP multicast groups | 128 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Power Indicator (PWR) Green | Power LED x 3 |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2 Watts (power device not included) |
| PoE Power Output |
12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port, 24 ~ 57VDC - total power budget is 120Watts with |
| maximum 30Watts per port | |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 54.3 x 120 x 145.1 mm |
| Weight | 924g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷75°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Network security | IEC 62443-4-2 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#06520
Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)
IGPS-9084GP-LA is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports.
The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40 °C to 75 °C.
IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40 °C to 75 °C.
IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 24 Gbps |
| Throughput (packet per second) | 17.856Mpps@64Bytes |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 256 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2Watts (power device not included) |
| PoE Power Budget | 240 Watts |
| Hi-POT | 1.5KV AC |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches) |
| Weight | 779g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Network security | IEC 62443-4-2 |
| Safety | EN60950 |
| MTBF | 516416hrs |
| Warranty | |
| Warranty period | 5 years |
#07640
Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)
RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 °C to 75 °C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.
RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 °C to 75 °C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE): 8 (-40 ~ 60oC : provided total 240watts maximum, 60 ~ 75oC : provided total 120watts maximum)
1000 SFP: 4
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (115200bps 8 N 1) (support backup unit DBU-01)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base-FX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 24 Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128/VLAN
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP, NTP server
Network Redundancy: STP, RSTP, O-Ring, MSTP
LED Indicators
Ring Master indicator: Green - indicates system operated in O-Ring Master mode
Fault indicator: Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator: Green for port Link/Act, Amber for 100Mbps
Fiber port indicator: Green for port Link/Act
PoE indicator: Blue PoE LED x 8
Power
Input power: 100~240VAC, 50~60Hz (power supply included)
Power consumption (typical): 260Watts (Typ.)
Overload current protection: present
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 443.7 x 230 x 44 mm
Weight: 3730 g
Environmental
Storage Temperature: -40÷85°C(-40÷185°F)
Operating Temperature: -40÷70°C (-40÷158°F)
Operating Humidity: 5%÷95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE): 8 (-40 ~ 60oC : provided total 240watts maximum, 60 ~ 75oC : provided total 120watts maximum)
1000 SFP: 4
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (115200bps 8 N 1) (support backup unit DBU-01)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base-FX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 24 Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128/VLAN
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP, NTP server
Network Redundancy: STP, RSTP, O-Ring, MSTP
LED Indicators
Ring Master indicator: Green - indicates system operated in O-Ring Master mode
Fault indicator: Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator: Green for port Link/Act, Amber for 100Mbps
Fiber port indicator: Green for port Link/Act
PoE indicator: Blue PoE LED x 8
Power
Input power: 100~240VAC, 50~60Hz (power supply included)
Power consumption (typical): 260Watts (Typ.)
Overload current protection: present
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 443.7 x 230 x 44 mm
Weight: 3730 g
Environmental
Storage Temperature: -40÷85°C(-40÷185°F)
Operating Temperature: -40÷70°C (-40÷158°F)
Operating Humidity: 5%÷95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years
#07976
Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)
ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100/1000 SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 28 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 128 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Power Indicator (PWR) Green | Power LED x 3 |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2Watts (power device not included) |
| PoE Power Output 50 ~ 57VDC | total power budget is 240Watts with maximum 30Watts per port |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3 x 109.2 x 153.6 mm |
| Weight | 1270g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07977
Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)
ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100/1000 SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 28 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 128 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Power Indicator (PWR) Green | Power LED x 3 |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2Watts (power device not included) |
| PoE Power Output |
12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port, 24 ~ 57VDC - total power budget is 120Watts with |
| maximum 30Watts per port | |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3 x 109.2 x 153.6 mm |
| Weight | 1270g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07980
Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)
RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 22 |
| Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports | 2 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port |
RS-232 in DB9 connector with console cable (115200bps, 8, N, 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 52 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 128/VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security |
| Network Redundancy |
STP, RSTP, O-Ring, MSTP |
| LED Indicators | |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| O-Ring indicator |
Green - Indicate system operated in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 10/100/1000TX RJ45 port indicator | Green for port Link/Act |
| Fiber port indicator | Green for port Link/Act |
| PoE indicator | Green PoE LED x 24 |
| Power | |
| Input power | 100~240VAC with power socket |
| Power supply | 450 Watts power supply included (320W power budget) |
| Power consumption (typical) | 37Watts (Typ.) |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 431mm x 342mm x 44mm |
| Weight | 5000 g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷60°C (-40÷140°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
Page 1 of 12
|
