MENU
#09047
867Mbps Wireless access point, 5GHz (TP-LINK CPE710)
- 802.11ac for up to 867Mbps on 5GHz wireless data rate
- 23dBi high-gain directional 2×2 MIMO, ideal for long-distance application
- Excellent beam directivity, improved latency and noise cancellation
- Innovative snap-lock parts make for fast assembly and a sturdy structural design keeps CPE710 stable even in strong winds
- Durable IP65 weatherproof enclosure along with 15kV ESD and 6kV lightning protection ensures all-weather suitability
- Pharos Control gives administrators a free, centralized management system
- Passive PoE supports to allow flexible deployment and convenient installation
| Processor |
Qualcomm 750 MHz, MIPS 74Kc |
|---|---|
| Memory |
128 MB DDR2 RAM, 16 MB Flash |
| Standards |
IEEE 802.11a, IEEE 802.11n, IEEE 802.11ac |
| Ports |
1 10/100/1000Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 Reset Button |
| Wireless Configurations |
Pharos MAXtream TDMA Technology, 802.11a/n Modes, Selectable Channel Width 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter |
| Security |
WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
| Wireless Advanced |
Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server |
| System Tools |
Wireless Signal Quality Indicators - Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors - Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute |
| Signal Rate |
Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic) |
| Receiver sensitivity |
802.11a 54M@ -75dBm 48M@ -76dBm 36M@ -83dBm 6-24M@ -95dBm, 802.11n MCS15 -73dBm, MCS14 -74dBm, MCS13 -76dBm, MCS12 -80dBm, MCS11 -83dBm, MCS10 -88dBm, MCS9 -90dBm, MCS8 -93dBm, MCS7 -73dBm, MCS6 -74dBm, MCS5 -76dBm, MCS4 -80dBm, MCS3 -83dBm, MCS2 -88dBm, MCS1 -90dBm, MCS0 -93dBm |
| Antenna | 23 dBi |
| Beam width | 9° (Azimuth)/7° (Elevation) |
| Dimensions | 366 x 280 x 207 mm (14.4 x 11.0 x 8.1 in.) |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range 16-27VDC |
| Protection |
15KV ESD Protection, 6000V Lightning Protection |
| Enclosure |
Outdoor ASA stabilized plastic material, IP65 water and dust proof design |
| Package Contents |
Outdoor Wireless CPE, 24V 0.5A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide |
| Operating temperatures | -40°C ÷ 70°C |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux. |
| Certificates |
CE, FCC, RoHS, IP65, IC |
| Manufacturer | Tp-Link |
#07018
Wireless access point Ubiquiti NanoBeam M5 (Ubiquiti NBE-5AC-Gen2)
| Standards | IEEE 802.11ac/n |
|---|---|
| Ports | 2x 10/100/1000 Mbps RJ-45 |
| Chipset |
Atheros MIPS 74Kc, 720 MHz |
| Operating memory | 128 MB DDR2 |
| Flash memory | 8 MB |
| Antenna |
build-in, 19 dBi |
| VSWR | 1.5 |
| Dimensions | 189 x 189 x 125 mm |
| Weight | 0.530 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 8.5 W |
| Power | PoE 24V 0.5A Gigabit PoE Adapter (Included) |
| Operating temperatures | -40°C ÷ 80°C |
| Operating humidity |
5% ÷ 95%, Non-condensing |
| Wind Loading | 45.4 N @ 200 km/h (10.2 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| ESD/EMP Protection Air |
± 24 kV, Contact ± 24 kV |
| Certifications |
CE, FCC, IC |
| RoHS Compliance | Yes |
| Salt Fog Test |
IEC 68-2-11 (ASTM B117), Equivalent MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test |
IEC 68-2-5 at 40° C (104° F), Equivalent ETS 300 019-1-4 |
| Wind-Driven Rain Test |
ETS 300 019-1-4, Equivalent MIL-STD-810 G Method 506.5 |
| Manufacturer | Ubiquiti |
#07004
Wireless Access Point Ubiquiti NanoStation 5 AC (Ubiquiti NS-5AC)
| Ports | 2x 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.6 |
| Beam width | 45° |
| Dimensions | 257 x 84 x 41 mm |
| Weight | 233 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07005
Wireless Access Point Ubiquiti NanoStation AC Loco (Ubiquiti NS-5ACL)
| Ports | 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.8 |
| Beam width | 45° |
| Dimensions | 179 x 77.5 x 59.1 mm |
| Weight | 180 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07072 PoE 802.3af Adapter, POE-24-24W-G
#07039
Wireless Access Point Ubiquiti NanoStation AC Loco 5-pack (Ubiquiti NS-5ACL)
| Ports | 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.8 |
| Beam width | 45° |
| Dimensions | 179 x 77.5 x 59.1 mm |
| Weight | 180 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07072 PoE 802.3af Adapter, POE-24-24W-G
#05349
Wireless Access Point Ubiquiti UniFi UAP AC M PRO, AC Mesh; (Ubiquiti UAP-AC-M-PRO)
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas | 3x Internal Dual-Band Antennas (8 dBi) |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method | 802.3af PoE (Supported Voltage Range- 44 to 57VDC) |
| Power Supply |
48V, 0.5A Gigabit PoE Adapter |
| Maximum Power Consumption | 9 W |
| Maximum TX Power | 22 dBm |
| BSSID | Up to 8 per Radio |
| Dimensions | 343.2 x 181.2 x 60.2 mm |
| Weight | 633 g |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -40 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n |
6.5 Mbps to 400 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| Manufacturer | Ubiquiti |
#05348
Wireless Access Point Ubiquiti UniFi UAP AC M, AC Mesh; (Ubiquiti UAP-AC-M)
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2x External Dual-Band Omni Antennas (3 dBi, 4 dBi) |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
24V Passive PoE (Pairs 4, 5+; 7, 8 Return); 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), (Supported Voltage Range- 44 to 57VDC) |
| Power Supply |
24V, 0.5A Gigabit PoE Adapter |
| Maximum Power Consumption | 8,5 W |
| Maximum TX Power | 20 dBm |
| BSSID | Up to 8 per Radio |
| Dimensions | 353 x 46 x 34.4 mm |
| Weight | 152 g with Antennas |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -30 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| Manufacturer | Ubiquiti |
#05352
Wireless Access Point UniFi UAP AC Lite (Ubiquiti UAP-AC-Lite)
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
| Power Supply |
24V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 6.5 W |
| Maximum TX Power |
2.4 GHz - 20 dBm, 5 GHz - 20 dBm |
| BSSID | Up to 8 Per Radio |
| Dimensions | 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24") |
| Weight | 170 g (185 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
#08871
Wireless Access Point UniFi UAP AC LR (Ubiquiti UAP-AC-LR)
Ideal for long-range deployments, the UniFi AC LR AP offers simultaneous, dual-band operation with 3x3 MIMO in the 2.4 GHz band and 2x2 MIMO in the 5 GHz band.
The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high
transmit power does for connecting distant clients.
The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high
transmit power does for connecting distant clients.
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
| Power Supply |
24V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 6.5 W |
| Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
| BSSID | Up to Four Per Radio |
| Dimensions | 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70") |
| Weight | 240 g (315 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
#08352
Wireless Access Point UniFi UAP AC PRO (Ubiquiti UAP-AC-PRO)
| Ports |
2 x 10/100/1000 Ethernet Ports, , 1x USB 2.0 Port |
|---|---|
| Buttons | Reset |
| Antennas |
(3) Dual-Band Antennas, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (48V), 802.3af/at Supported |
| Power Supply |
48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 9 W |
| Maximum TX Power |
2.4 GHz - 22 dBm, 5 GHz - 22 dBm |
| BSSID | Up to 8 Per Radio |
| Dimensions | 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38") |
| Weight | 350 g (450 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
Page 3 of 9
|
