MENU
#08941
300Mbps Wireless access point, 2.4GHz (TP-LINK CPE210)
| Processor |
Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
|---|---|
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Standards |
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ports |
1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE |
| Passthrough), 1 Grounding Terminal, 1 Reset Button | |
| Wireless Configurations |
Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter |
| Security |
WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
| Wireless Advanced |
Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server |
| System Tools |
Wireless Signal Quality Indicators - Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors - Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute |
| Signal Rate |
Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic) |
| Receiver sensitivity |
802.11b 11M@ -95dBm, 5,5M@ -96dBm, 2M@ -96dBm, 1M@ -96dBm 802.11g 54M@ -79dBm 48M@ -80dBm 36M@ -84dBm 6-24M@ -88dBm, 802.11n MCS15 -76dBm, MCS14 -78dBm, MCS13 -80dBm, MCS12 -84dBm, MCS11 -87dBm, MCS10 -91dBm, MCS9 -93dBm, MCS8 -96dBm, MCS7 -76dBm, MCS6 -78dBm, MCS5 -80dBm, MCS4 -84dBm, MCS3 -87dBm, MCS2 -91dBm, MCS1 -93dBm, MCS0 -96dBm |
| Antenna | Built-in 9dBi 2x2 Dual-polarized Directional Antenna |
| Beam width | 65° (H-Plane) / 35° (E-Plane) |
| Dimensions | 224 x 79 x 60 mm |
| Power Consumption |
10.5 Watts Max (When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable) |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range 16-27VDC |
| Protection |
15KV ESD Protection, 6000V Lightning Protection |
| Enclosure |
Outdoor ASA stabilized plastic material, IPX5 waterproof Certification |
| Package Contents |
Outdoor Wireless CPE, 24V 1A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide |
| Operating temperatures | -30°C ÷ 70°C |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux. |
| Certificates |
CE, FCC, RoHS, IPX5 |
| Warranty | 5 years |
| Manufacturer | Tp-Link |
#08940
300Mbps Wireless access point, 5GHz (TP-LINK CPE510)
| Processor |
Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc |
|---|---|
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Standards |
IEEE 802.11a, IEEE 802.11n |
| Ports |
1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough), 1 Grounding Terminal, 1 Reset Button |
| Wireless Configurations |
Pharos MAXtream TDMA Technology, 802.11a/n Modes, Selectable Channel Width 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter |
| Security |
WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
| Wireless Advanced |
Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server |
| System Tools |
Wireless Signal Quality Indicators - Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors - Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute |
| Signal Rate |
Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic) |
| Receiver sensitivity |
802.11a 54M@ -75dBm 48M@ -76dBm 36M@ -83dBm 6-24M@ -95dBm, 802.11n MCS15 -73dBm, MCS14 -74dBm, MCS13 -76dBm, MCS12 -80dBm, MCS11 -83dBm, MCS10 -88dBm, MCS9 -90dBm, MCS8 -93dBm, MCS7 -73dBm, MCS6 -74dBm, MCS5 -76dBm, MCS4 -80dBm, MCS3 -83dBm, MCS2 -88dBm, MCS1 -90dBm, MCS0 -93dBm |
| Antenna | Built-in 13dBi 2x2 Dual-polarized Directional Antenna |
| Beam width | 45° (H-Plane) / 30° (E-Plane) |
| Dimensions | 224 x 79 x 60 mm |
| Power Consumption |
13 Watts Max (When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable) |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range 16-27VDC |
| Protection |
15KV ESD Protection, 6000V Lightning Protection |
| Enclosure |
Outdoor ASA stabilized plastic material, IPX5 waterproof Certification |
| Package Contents |
Outdoor Wireless CPE, 24V 1A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide |
| Operating temperatures | -30°C ÷ 70°C |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux. |
| Certificates |
CE, FCC, RoHS, IPX5 |
| Warranty | 5 years |
| Manufacturer | Tp-Link |
#04661
300Mbps Wireless Access Point, N (TP-Link EAP110)
- EAP Controller Software enables administrators to easily manage hundreds of EAPs
- Supports passive PoE for convenient installation up to 100meters
- Ceiling mounting design with chassis make it easy to deploy on a wall or ceiling
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Multi-SSID divides multiple wireless networks for different users
- Enterprise class Wi-Fi security help to decrease network security threats
| Standards | IEEE 802.11n/g/b |
|---|---|
| Ports | Fast Ethernet (RJ-45) Port *1 (Support Passive PoE) |
| Frequency range | 2.4-2.4835GHz |
| Signal Rate |
11n Up to 300Mbps(dynamic), 11g Up to 54Mbps(dynamic), 11b Up to 11Mbps(dynamic) |
| EIRP |
FCC <26dBm(2.4GHz), CE <20dBm |
| Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
| Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
| EAP Controller Software | Yes |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1, v2c |
| System Logging Local/Remote Syslog | Local/Remote Syslog |
| Telnet | Yes |
| Web-based Management | HTTP/HTTPS |
| L3 Management | Yes |
| Multi-site Management | Yes |
| Management VLAN | Yes |
| Antenna | Internal 2* 3dBi Omni |
| Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
| Power | 24VDC / 1A Passive PoE Supply |
| Power Consumption | 7.7 W |
| Mounting | Ceiling /Wall Mounting (Kits included) |
| Physical Security Lock | Kensington Lock Slot |
| Watch Dog | Yes |
| Operating Temperature | 0°C~40°C (-32℉~104℉) |
| Storage Temperature | -40℃~70℃ (-40℉~158℉) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
| Package Contents |
Wireless Access Point EAP110, Passive PoE Adapter, Power Adapter, Mounting Kits, Installation Guide |
| System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
| Certificates |
CE, FCC, RoHS |
| Warranty | 5 years |
#04660
300Mbps Wireless Access Point, N (TP-Link EAP115)
- Free Auranet Controller Software enables administrators to easily manage hundreds of EAPs
- The user-friendly Cluster Mode allows manage up to 24 (EAP115) without requiring any extra hardware or software
- Supports Power over Ethernet (802.3af) for convenient and affordable installation
- Simple mounting design for easy attachment to a wall or ceiling
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Enterprise class Wi-Fi security help to decrease network security threats
- Multi-SSID divides multiple wireless networks for different user types
| Standards | IEEE 802.11n/g/b |
|---|---|
| Ports | Fast Ethernet (RJ-45) Port *1 (ETH1 Support IEEE802.3af PoE) |
| Frequency range | 2.4-2.4835GHz |
| Signal Rate |
11n Up to 300Mbps(dynamic), 11g Up to 54Mbps(dynamic), 11b Up to 11Mbps(dynamic) |
| EIRP |
FCC <26dBm(2.4GHz), CE <20dBm |
| Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
| Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
| EAP Controller Software | Yes |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1, v2c |
| System Logging Local/Remote Syslog | Local/Remote Syslog |
| Telnet | Yes |
| Web-based Management | HTTP/HTTPS |
| L3 Management | Yes |
| Multi-site Management | Yes |
| Management VLAN | Yes |
| Antenna | Internal 2* 3dBi Omni |
| Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
| Power | PoE or External 12VDC / 1A Power Supply |
| Power Consumption | 5 W |
| Mounting | Ceiling /Wall Mounting (Kits included) |
| Physical Security Lock | Kensington Lock Slot |
| Watch Dog | Yes |
| Operating Temperature | 0°C~40°C (-32℉~104℉) |
| Storage Temperature | -40℃~70℃ (-40℉~158℉) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
| Package Contents |
Wireless Access Point EAP115, Power Adapter, Mounting Kits, Installation Guide |
| System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
| Certificates |
CE, FCC, RoHS |
| Warranty | 5 years |
#08843
Wireless access point Ubiquiti NanoBeam M2 MIMO (Ubiquiti NBE-M2-13)
| Standards | IEEE 802.11n |
|---|---|
| Ports | 1x 10/100 Mbps RJ-45 |
| Chipset |
Atheros MIPS 74KC, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Flash memory | 8 MB |
| Antenna |
build-in, 18 dBi |
| VSWR | 1.5 |
| Diameter | 189mm |
| Weight | 1.795 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 6 W |
| Power | PoE 24V |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, Non-condensing |
| Manufacturer | Ubiquiti |
#08141
Wireless access point Ubiquiti NanoStation Loco M2 (Ubiquiti LOCOM2)
| Standards |
IEEE 802.11b/g/n, IEEE 802.3u |
|---|---|
| Ports | 1x 10/100 Mbps RJ-45 |
| Operating modes |
Access Point, Bridge, Client, WDS |
| Chipset |
Atheros MIPS 24KC, 400MHz |
| Operating memory | 32MB SDRAM |
| Flash memory | 8MB |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Max. output power | 20 dBm |
| Antenna |
build-in, 8 dBi, detachable RSMA |
| Dimensions | 163x80x31 mm |
| Weight | 0.18 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5.5 W |
| Power | PoE 24V |
| Operating temperatures | -30°C ÷ 80°C |
| Operating humidity |
5% ÷ 90%, non-condensing |
| Certificates |
CE, FCC, IC RS210 |
#08928
Wireless access point Ubiquiti NanoStation M2 (Ubiquiti NSM2)
| Standards |
IEEE 802.11b/g/n, IEEE 802.3u |
|---|---|
| Ports | 2x 10/100 Mbps RJ-45 |
| Operating modes |
Access Point, Bridge, Client, WDS |
| Chipset |
Atheros MIPS 24KC, 400MHz |
| Operating memory | 32MB SDRAM |
| Flash memory | 8MB |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Gain | 10.4-11.2 dBi |
| Max. output power | 23 dBm |
| Dimensions | 294 x 31 x 80 mm (11.57 x 1.22 x 3.15") |
| Weight | 400 g |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5.5 W |
| Power |
PoE 24V, 0.5A |
| Operating temperatures | -30°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
FCC Part 15.247, IC RS210, CE |
| Shock & Vibration | ETSI300-019-1.4 |
#08394
Wireless Access Point UniFi UAP PRO (Ubiquiti UAP-PRO)
The UniFi® Enterprise Wi-Fi System is a scalable enterprise
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - 3 Integrated (Supports 3x3 MIMO with Spatial Diversity), 5 GHz - 2 Integrated (Supports 2x2 MIMO with Spatial Diversity) |
| Wi-Fi Standards | 802.11 a/b/g/n |
| Power Method |
Passive Power over Ethernet (48V), 802.3af Supported |
| Power Supply |
48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 12 W |
| Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
| BSSID | Up to Four Per Radio |
| Dimensions | 200 x 200 x 36.5 mm |
| Weight | 298 g (358 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 80% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#09118
Mini Wireless adapter N USB 2.0, 300Mbps (TP-Link Mercusys MW300UM)
- Provides fast 300Mbps Wi-Fi connections for wired devices
- Ideal for online gaming, HD streaming, web browsing, and more
- Supports Windows 10/8.1/8/7/XP (32/64bit)
| Standards |
IEEE 802.11 b/g, IEEE 802.11n |
|---|---|
| Interface | USB 2.0 typ A |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Max. speed | 300 Mbps when connected to 11n device |
| Max. output power | 20 dBm |
| WLAN security |
WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Drivers | Windows 10/8.1/8/7/XP (32/64bit) |
| Dimmensions | 42.9 × 17.2 × 8.5 mm |
| Operating temperatures | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Manufacturer | TP-Link |
#08549
Mini Wireless adapter N USB 2.0, 300Mbps (TP-Link TL-WN823N)
- 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming
- Mini-sized design for convenient portability with a reliable high performance
- SoftAP Mode – Turn a wired internet connection to a PC or Laptop into a Wi-Fi hotspot
- Easily setup a secure wireless connection with one-touch WPS button
| Standards |
IEEE 802.11 b/g, IEEE 802.11n |
|---|---|
| Interface | USB 2.0 typ A |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Max. speed | 300 Mbps when connected to 11n device |
| Max. output power | 20 dBm |
| Modulation type |
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
| Operating modes |
Soft AP Mode, Client Mode (support Ad-hoc/Infrastructure network) |
| WLAN security |
64/128 bits WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) |
| Roaming support | yes |
| WLAN features |
MIMO, CCA |
| Drivers | Windows Windows XP/Vista/7 |
| Dimmensions | 39 x 18.35 x 7.87mm |
| Operating temperatures | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Certificates |
CE, FCC, RoHS |
| Manufacturer | TP-Link |
Page 2 of 6
|
