MENU
#08132
Routerboard MikroTik RB711-5Hn-uFL
| CPU | Atheros AR7240 400MHz |
|---|---|
| Memory |
32MB, SDRAM |
| Wireless standards |
Built in 5GHz AR9280 802.11a/n card, 1 MMCX/uFL connector (depends on model) |
| Copper ports | 1x 10/100 Mbps RJ-45 |
| Auto MDI/MDI-X | yes |
| Bootloader | RouterBOOT |
| Data storage |
64MB NAND, build-in |
| Speaker | beeper |
| Dimensions | 105x105 mm |
| Power | PoE 10 V ÷ 28 V DC |
| Power consumption | 4.5W |
| Operating system | MikroTik Router OS 2.9 Level 4 |
| Manufacturer | MikroTik |
#07093
Routerboard MikroTik RB750
| CPU | QCA9533 850 MHz |
|---|---|
| Memory | 64 MB |
| Data storage | 16 MB |
| Copper ports | 5x 10/100 Mbps RJ-45 Ethernet ports |
| Number of DC inputs |
2 (DC jack, PoE-IN) |
| DC jack input Voltage | 6-30 V |
| Max power consumption | 2 W |
| Cooling type | Passive |
| PoE in | Passive PoE |
| PoE in input Voltage | 6-30 V |
| Dimensions | 113x89x28mm |
| Tested ambient temperature | -40°C to 70°C |
| Operating system | RouterOS |
| Certification |
CE, EAC, ROHS |
| IP | IP20 |
| Manufacturer | MikroTik |
#06640
Wireless access point 2.4GHz (MikroTik Routerboard RB951Ui-2nD)
This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.
The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
| Standards | IEEE 802.11b/g/n |
|---|---|
| Ports |
5x 10/100 Mbps RJ-45, 1x USB |
| Chipset |
MIPSBE, QCA9531, 650 MHz |
| Operating memory | 64MB DDR SDRAM |
| Storage size | 16 MB |
| Frequency range | 2.4 - 2.5GHz |
| Antenna |
build-in, 2 dBi |
| Beam width | 360° |
| Dimensions | 113 x 89 x 28mm |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5 W |
| Power | 6 V - 30 V (Jack or Passive PoE) |
| Operating temperatures | -30°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC, EAC, ROHS |
| Manufacturer | MikroTik |
Page 1 of 2
|
